เหมาะสำหรับ
- เหมาะสำหรับใช้งานอุตสาหกรรม
- อุตสาหกรรมโครงสร้างการต่อเรือ
- อลูมิเนียมหล่อ และเสื้อสูบเครื่องยนต์
- ฝาสูบ
- ท่อหรือเฟรม
- อุตสาหกกรมเฟรมจักรยาน ยานยนต์ รถบัส หรือรถพ่วง
- อุตสาหกรรมรางรถไฟ
Suitable for
- This alloy is commonly used in the construction industry in
- Structural Frames in The shipbuilding industry.
- Cts and Housings.
- Clyinder Heads.
- Pipes and Frames.
- Bicycle, Automotive, Bus and Trailer lndustry Structural Frames.
- Railway Industry.
ตำแหน่งการเชื่อม
-
สามารถเชื่อมได้ทุกท่าเชื่อม
Welding Position
- All, Expect vertical down
Guideline For use
- For MIG set machie on DC reverse polarity. Use Ar shielding gas. Make sure all contaminants such as grease and oil are removed. Hold a short arc and weld with stringer beads or a slight weave bead.
Recommended
-
This alloy is not recommended for elevated temperature applications (above 150°F).
Storage
- Product should be in a dry, enclosed environment, and in its original intact packaging.
Shielding gases (Acc.ISO 14175)
- I1 Inert gas Ar (100%)
- I3 Inert gas Ar+ 0.5-95% Helium mixtures
- Flow rate 14.2-23.6L/min
Chemical Composition (%) Ø1.2mm
|
Element |
Fe |
Si |
Mn |
Cr |
Zn |
Mg |
Cu |
Ti |
|
Requirement |
≤0.4 |
≤0.25 |
0.05~0.2 |
0.05~0.2 |
≤0.1 |
4.5~5.5 |
≤0.1 |
0.06~0.2 |
|
Actual Result |
0.12 |
0.26 |
0.082 |
0.061 |
0.020 |
5.12 |
0.01 |
0.12 |
Warning
- Protect yourslf and others. Read and understand this information. FUMES AND GASES can be hazardous to your health. ARC RAYS can injure eyes and burn skin. ELECTEIC SHOCK can KILL
- Before use, read and understand the manufacturer's instructions, Material Safety Data Sheets (MSDSs), and your employer's safety practices.
- Keep your gead out of fimes.
- Use enough ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing zone and the general area.
- Wear correct eye, ear, and body protection. Do not touch live electrical parts.